audi radio removal tool get audi radio removal tool volkswagen radio removal tool -- mmk4mkt

top

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

Complete VW Audi Radio Keys 24.99

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Radio Keys for VW Audi 14.99

Set Radio Removal Tools
Complete Set of 4Volkswagen Audi Radio Removal ToolsAudi A4, A6, A8 and New BeetleFor Concert, Symphony I and Symphony II stereos.Also for Nav units in Trunk and for CD changers in Glove box.

Re: Resetting Factory Stereo and Handsfree* Mounting Bracket: InstalliionYour Handsfree* kit may require you to remove the radio.(Only two of these are required for Concert, Concert II, Gamma, Delta and others)Tools are for "Top Left" or Top Right" etc.
Buying Radio Keys can be confusing. Here is the deal. If you are working on the vehicles mentioned above or a newer vehicle which requires 4 keys, the odss are this set will do the job.

More radio info: If you are looking for the (2 key set for units with only two slots type the number 3316 in the seach button).

Set Radio Removal Keys 14.99

Radio Removal Tool Special 15.99

Very popular BMW Radio Removal Tool.Pentagon shaped tool with 5 Sides.The overall length of this tool is 3 5/8 inches.Applicable: Most BMWs.Including E38 E39 7 Series etc...This tool is used to release anti theft radio mounts.
Plus you get a 15 Piece Ratchet and Bit SetIncludes 6 each 1/4 drive 6 point sockets sizes 3/16, 1/4, 5/16 plus 6, 7, and 8mm.Also included are 6 screwdriver bits 2 slotted ( 3/16 and 1/4) 3 Phillips (1, 2 and 3) plus a 1/4 Dr Hex adapter.You can use the 6, 7 and 8mm hex sockets for hose clamps on German cars and many other applications.Set comes in a blow molded carrying case.

BMW Radio Tool 15.00

Antenna Wrench & Radio Service Set 26.99

Antenna Wrench & Radio Service SetRemoves most foreign and domestic radio antennasIncludes tools needed to install and remove radios in GM, Ford and Chrysler vehiclesBonus Universal Code Retrieval ToolKit includes:8 Opening Universal Antenna WrenchFord Radio Removal ToolGM Standard & Tamper proof Radio Removal Tool

Switch Blade Radio Keys 37.50
O.E. ANTI THEFT RADIO KEY SWITCH BLADE
Radio Removal Kit Features:Special features:. Each key folds into the body handle like a pocket knife.. Each half of the tool kit allows for an even pulling action.. The two halves slide and are held together via an interlocking channel.. Every Key in the kit is current up to 2005.The full application range of this new kit is as follows:. Updated application key kit for Mercedes & all Porsche 996 and Boxster equipped withBecker radios.. Updated key combo for all Audi & VW radios up to 2004: models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.. Special Allen key for BMW E38 and E 39 models.. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:

ANTI THEFT RADIO KEY SET 35.99
"NEW"
O.E. ANTI THEFT
RADIO KEY SWITCH BLADE STYLE
Radio Removal Kit Features:
Special features:. Each key folds into the body
handle like a pocket knife.
. Each half of the tool kit allows for an even pulling action.
. The two halves slide and are held together
via an interlocking channel.
. Every Key in the kit is current up to 2005.
The full application range of this new kit is as follows:
. Updated application key kit for Mercedes & all Porsche 996
and Boxster equipped withBecker radios.
. Updated key combo for all Audi & VW radios up to 2004:
models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).
. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.
. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.
. Special Allen key for BMW E38 and E 39 models.
. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:

Radio Keys Set 6.99

Radio Removal ToolsITEM 2040 Applicable all VW / Audi with DIN chassis Radio MountAlso late model Fords with DIN

Radio Removal Tools 8.99

Set of 2 Radio Removal Keys for Mercedes. Please note the rubber on the handle for a better grip.Used to remove the Radio, A/C and some Instrument clusters most MB models124, 210, 163, 140, 208, 170, 202, 129, 201Very easy to use. Simply slide into radio or a/c instrument cluster slots (two thin slots) on the lower portion left and right of your radio, A/C controller, instrument cluster or navigation unit. The tools snap in pull to remove in just seconds without damage to your radio, A/C, climate control, instrument cluster etc...S, C, E, SL, ML, SLK, CLK.

Radio Kets Set 13.99
3316 Radio Removal Tools New Body Style Passat Jetta GolfPlease check your manuals for details.
read more:

BMW Daily Double 27.50

Daily Double!
Two Tools
Including Item Number BMW3022: Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.
Plus the two sided counter holder. More details about this tool number BMW 1703 Waterpump Tool
This special tool covers most popular applicationsUsed for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M52, M60, M62 (1703 should be used in conjunction with a 32mm or a 36mm thin wrench). Picture is not to scale.

Porsche Radio Removal Tools 8.99

Radio Removal Keys for Porsche
As good or better than the factory tools...
Please note the rubber on the handle for a better grip.
Appl: Turbo GT, GT2, GT3, Boxster,
Cayenne 911, 996 , 987, Carrera etc...
Same as Porsche ref: 000 721 957 01

NOTE : KEYS WILL ALSO WORK ON ALL NEWER MERCEDES
For Mercedes 1997 and newer.

Used to remove radio, (Becker) climate controls and Nav system.
Applicable most 97 and newer most
S, C, E, CL, SL, SLK, ML, G class vehicles.

Power Steering Waterpump Pulley Tool 24.00

VA6024Power Steering and Waterpump Pulley Removal & Replacement Tool Volkswagen AudiUsed to hold the power steering or water pump pulley stationarywhile removing or replacing the three socket headbolts that attach pulley to the shaft.Tool is designed to be used on pulleys that utilize these socket head bolts.Applications:VW Audi 4 cylinder water cooled gas or diesel engines from 1975 to current.Volkswagen V6 1992 and newer.Audi power steering pump pulley V8 1990 and newer.Audi V6 1992 to current.Also VW 1983 to 1988 and Audi 1981 to 1995 with socket head boltsholding the pulley to power steering pump.

4 Tools for BMW 34.99

Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) 
A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50
B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts.
C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws.
D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip.

Audi Headbolt Tool 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

Tappett Depressor 44.99

Tappet Depressor needed for preloading cam followerswhile exchanging valve adjusting shims.Applicable: Late model VW Audi 4 and 5 cylinder gas engines.More Detail: Some German Tool books have the following info on this tool...For all 4 cylinder engines with bucket tappets 1983 and Newerand all 5 and 6 Cylinder with bucket tappetsGolf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe,Audi 80 Quatro, Audi 100, 200,LT28 50D

Audi Headbolt Toolt 17.50

Tappet Depressor 44.99

Tappet Depressor 2078A used for preloading cam followerswhile exchanging valve adjusting shims.Applicable: Late model VW Audi 4 and 5 cylinder gas engines.More Detail: Some German Tool books have the following info on this tool...For all 4 cylinder engines with bucket tappets FROM YEAR 1983 and Newerand all 5 and 6 Cylinder with bucket tappetsGolf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe,Audi 80 Quatro, Audi 100, 200, LT28 50D

ASSEMBLY TOOL T40032 0.00

REMOVAL AND ASSEMBLY TOOL
USED FOR REMOVING AND INSTALLING REAR AXLE DIFFERENTIAL BEAINGS ON AUDI A4 (B6).

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Pin Wrench Socket 14.99

VW524Pin Wrench Socket with 1/2" drive.This tool is used for R&R of grooved ring retaining nuton strut tower of front shock absorber. Applicable: This popular tool is used on a wide variety of VW and Audi MK1 golf and GTi , MK2 Golf & GTi 8V and 16VPolos..Audi Coupe..Audi 80 & Audi 90
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Radio Kets Set 9.99

3316 Radio Removal Tools New Body Style Passat Jetta GolfPlease check your manuals for details.

Removal Tool for Weights 00

Removing Tool for stick on weights for aluminium alloy wheel rims.Blunt end with wheel shaped groove for removal of stick on weights,other end with replaceable screw on plastic wedge for removal of adhesives from rims. Overall length is 155mm.

14mm Brake Tool 34.99

14mm Hex Bit Brake Tool Ford Features:This unique tool has been developed to aid in the removal and installation of front disc brake calipers found on most 1984 and later Ford 6000, 7000 and 8000 CF series trucks. The use of this tool allows for quick and easy removal of the caliper without disassembling the front axle and steering arm assembly.Made from heat treated steel this tool comes in a black finish.

Headbolt Socket 17.50

This is the tool you are looking for.
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Axle Nut Removal Tool 00
Axle Nut Removal Tool 36mm
read more:

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Super Duty Headbolt Tool 37.50

Headbolt Tool ....Read:
Same as Number T10070
Super Strong Headbolt Tool 1/2 Drive
(notice the solid one piece design)
Tool used to remove and install cylinder headbolts. New "Stronger" One Piece design. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2" Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socket The old tool number was 3452 and is now discontinued.. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. The German Tool Books call this a Polydrive. This is NOT a Torx socket although it is a 6 point tool. The points are more flat (squared off) than a torx. and it is NOT a XZN (tri square) Socket.

Tappet Depressor Set 81.50

VW546 Tappet Depressor Tappet Depressor used for preloading cam followers. For Bucket Tappets on VW Golf, Jetta, Caddy, Scirocco, Passat up to 1982 Also Audi 80 , 100

Plus 2078A Tappet Depressor needed for preloading cam followers while exchanging valve adjusting shims. Applicable: Late model VW Audi 4 and 5 cylinder gas engines. More Detail: Some German Tool books have the following info on this tool... For all 4 cylinder engines with bucket tappets 1983 and Newer and all 5 and 6 Cylinder with bucket tappets Golf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe, Audi 80 Quatro, Audi 100, 200, LT28 50D.

Valve Spring Tool and Bridge 142.50

Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Mini Flashlight Radio 11.50
AM/FM Flashlight Radio
.AM/FM radio .Contoured, fingerfit design cabinet .Light reflector .FM antenna built into handstrap .Operates on two "AA" batteries (not included) .Size: 2 3/4" x 6 1/4" x 1 3/8"
read more:

Spark Plug Boot Tool 24.99

Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket on 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.

Axle Nut Removal Tool 11.95

Axle Nut Removal Tool 36mm

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

PULLEY HOLDING TOOL 74.99

AUDI & VW
FAN CLUTCH PULLEY HOLDING TOOL
AUDI 1996 2001 A6 2.8L V 6 & VW 1998 & later Passat 3.0L V 6

Pin Wrench 37.00

Heavy Duty Tensioner with Handle Grip
Same as Volkswagen number T10020
VW AUDI TENSION PULLEY SPANNER WRENCH This unique tool is for 1998 and later VW and Audi which require spanner wrench adjustments to the timing belt.Details: Special Wrench for adjusting the belt tension on the following: Audi: A6 1.6 (96 and newer) ALZ VW: Polo Classic, Golf, Bora, New Beetle 1.6 (97 ) AEH / AKL / APF / AUR /AVU / AYD Golf, Bora, New Beetle, 2.0 (98 ) AQY / APK

This is the new style Pin wrench with the (offset) angled head, same as the factory tool only this tool is a little longer for leverage with a rubber handle grip for a better feel compared to the smaller version.

Super Duty Pin Wrench 37.00

46mm Axle Nut Removal Tool 00
Axle Nut Removal Tool 46mm
read more:

7 Pc Socket Set 59.99
Set Includes:. 1" & 1 1/16" Oil Pressure Sending Unit Socket Includes a 1" and 1 1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2 5/8". Designed to be used with a 3/8" drive tool or 1 1/8" wrench.. 1 3/16" Oil Pressure Sending Unit SocketAllows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool.. 1 1/16" GM Thermal Sensor Switch SocketAllows the removal and installation of thermal sensor switch on 1973 1977 GM vehicles. Designed to be used with 1/2" drive tool.. 7/8" Heated Oxygen Sensor Socket Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2" drive for easy access.. 7/8" Low Profile Offset Oxygen Sensor SocketLow profile design for use in tight spaces. Designed to be used with 3/8" drive tool.. 7/8" Oxygen Sensor SocketSocket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8" drive tool or 1" wrench.. 7/8" Universal Vacuum PVS, TVS Valve and Oxygen Sensor SocketDesigned to remove and install vacuum switches with a 7/8" hex and some oxygen sensors. Designed to be used with 3/8" drive tool or with a 1" wrench.
read more:

New Style Headbolt Polydrive 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen AudiV6 and 4 Cylinder5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Cooling System Adapter 15.50

VOLKSWAGEN AUDI
COOLING SYSTEM ADAPTER
APPLICABLE:
VW AUDI WITH MALE THREADSON FILLER NECK OF EXPANSION TANK
(VW ALL PRE 90 / AUDI ALL PRE 90)
THIS IS A QUALITY TOOL MADE IN EUROPE

Special Hook 3370 29.99
Factory Tool 3370
Made in Germany.
TOOL USED TO REMOVE FRONT SEAT BACK REST PANEL ON AUDI A4.
read more:

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

10mm Glow Plug Tool 69.99

10mm Universal Glow Plug Socket mainly for VW Audi Diesel Injection TDI 3/8 Drive.
High quality tool
Made in Germany by Hazet!
DETAILS: ALFA ROMEO, AUDI, CHRYSLER, FIAT, FORD, MERCEDES, LAND ROVER, RENAULT, SEAT, VOLKSWAGEN.

You Searched for

audi radio removal tool