Complete VW Audi Radio Keys 24.99 | Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details. You will get virtually full VOLKSWAGEN coverage with this set Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES |
read more:
Grand Master! Radio Tool Set 34.99 | Master Radio Removal Tool Set 18 Piece Set includes the following tools needed to install and remove radios :. 2pc. Radio Removal U Hook (Ford/VW/Audi/Grundig/Blaupunkt) . 1pc. Special Pentagon Wrench (BMW). 4pc. Radio Removal Keys (VW/Audi/Becker/Mercedes Benz) . 2pc. Radio Removal Keys (Mercedes Benz/Porsche/Becker). 2pc. Radio Removal Keys (VW). 1pc. Allen Hex Wrench (BMW/Opel). 2pc. Radio Removal Keys (New Becker). 2pc. Radio Removal Keys (New Skoda). 2pc. Radio Removal U Hook (New Blaupunkt) |
read more:
Radio Removal Tool Special 15.99 | Very popular BMW Radio Removal Tool.Pentagon shaped tool with 5 Sides.The overall length of this tool is 3 5/8 inches.Applicable: Most BMWs.Including E38 E39 7 Series etc...This tool is used to release anti theft radio mounts. Plus you get a 15 Piece Ratchet and Bit SetIncludes 6 each 1/4 drive 6 point sockets sizes 3/16, 1/4, 5/16 plus 6, 7, and 8mm.Also included are 6 screwdriver bits 2 slotted ( 3/16 and 1/4) 3 Phillips (1, 2 and 3) plus a 1/4 Dr Hex adapter.You can use the 6, 7 and 8mm hex sockets for hose clamps on German cars and many other applications.Set comes in a blow molded carrying case. |
read more:
BMW Radio Tool 15.00 | Very popular BMW Radio Removal Tool. Pentagon shaped tool with 5 Sides. The overall length of this tool is 3 5/8 inches. Applicable: Most BMWs. Including E38 E39 7 Series etc... This tool is used to release anti theft radio mounts. |
read more:
Antenna Wrench & Radio Service Set 26.99 | Antenna Wrench & Radio Service SetRemoves most foreign and domestic radio antennasIncludes tools needed to install and remove radios in GM, Ford and Chrysler vehiclesBonus Universal Code Retrieval ToolKit includes:8 Opening Universal Antenna WrenchFord Radio Removal ToolGM Standard & Tamper proof Radio Removal Tool |
read more:
Best Seller ! Radio Tools Set 24.99 | This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01 |
read more:
Factory Brake Caliper Tool 98.50T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB
read more:
Set Radio Removal Keys 14.99 | Set Radio Removal Tools Complete Set of 4Volkswagen Audi Radio Removal ToolsAudi A4, A6, A8 and New BeetleFor Concert, Symphony I and Symphony II stereos.Also for Nav units in Trunk and for CD changers in Glove box.
Re: Resetting Factory Stereo and Handsfree* Mounting Bracket: InstalliionYour Handsfree* kit may require you to remove the radio.(Only two of these are required for Concert, Concert II, Gamma, Delta and others)Tools are for "Top Left" or Top Right" etc. Buying Radio Keys can be confusing. Here is the deal. If you are working on the vehicles mentioned above or a newer vehicle which requires 4 keys, the odss are this set will do the job.
More radio info: If you are looking for the (2 key set for units with only two slots type the number 3316 in the seach button). |
read more:
ANTI THEFT RADIO KEY SET 35.99"NEW"
O.E. ANTI THEFT
RADIO KEY SWITCH BLADE STYLE
Radio Removal Kit Features:
Special features:. Each key folds into the body
handle like a pocket knife.
. Each half of the tool kit allows for an even pulling action.
. The two halves slide and are held together
via an interlocking channel.
. Every Key in the kit is current up to 2005.
The full application range of this new kit is as follows:
. Updated application key kit for Mercedes & all Porsche 996
and Boxster equipped withBecker radios.
. Updated key combo for all Audi & VW radios up to 2004:
models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).
. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.
. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.
. Special Allen key for BMW E38 and E 39 models.
. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:
Switch Blade Radio Keys 37.50O.E. ANTI THEFT RADIO KEY SWITCH BLADE
Radio Removal Kit Features:Special features:. Each key folds into the body handle like a pocket knife.. Each half of the tool kit allows for an even pulling action.. The two halves slide and are held together via an interlocking channel.. Every Key in the kit is current up to 2005.The full application range of this new kit is as follows:. Updated application key kit for Mercedes & all Porsche 996 and Boxster equipped withBecker radios.. Updated key combo for all Audi & VW radios up to 2004: models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.. Special Allen key for BMW E38 and E 39 models.. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:
Brake Caliper Tool 110.00 | T10165 Brake Caliper Tool The old number for this tool was 3272 (discontinued) T10165 is the correct current factory number for this tool. Brand New Tool Made in Germany. Some Vehicles include: Beetle 1.8 Turbo (see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165) Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 , Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL , Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL , Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo , Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP , Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 , Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL , Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP, Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH , Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel , Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB |
read more:
Radio Removal Tools 8.99 | Set of 2 Radio Removal Keys for Mercedes. Please note the rubber on the handle for a better grip.Used to remove the Radio, A/C and some Instrument clusters most MB models124, 210, 163, 140, 208, 170, 202, 129, 201Very easy to use. Simply slide into radio or a/c instrument cluster slots (two thin slots) on the lower portion left and right of your radio, A/C controller, instrument cluster or navigation unit. The tools snap in pull to remove in just seconds without damage to your radio, A/C, climate control, instrument cluster etc...S, C, E, SL, ML, SLK, CLK. |
read more:
Radio Kets Set 13.993316 Radio Removal Tools New Body Style Passat Jetta GolfPlease check your manuals for details.
read more:
Radio Keys for VW Audi 14.99 | Set Radio Removal Tools Complete Set of 4Volkswagen Audi Radio Removal ToolsAudi A4, A6, A8 and New BeetleFor Concert, Symphony I and Symphony II stereos.Also for Nav units in Trunk and for CD changers in Glove box.
Re: Resetting Factory Stereo and Handsfree* Mounting Bracket: InstalliionYour Handsfree* kit may require you to remove the radio.(Only two of these are required for Concert, Concert II, Gamma, Delta and others)Tools are for "Top Left" or Top Right" etc. Buying Radio Keys can be confusing. Here is the deal. If you are working on the vehicles mentioned above or a newer vehicle which requires 4 keys, the odss are this set will do the job.
More radio info: If you are looking for the (2 key set for units with only two slots type the number 3316 in the seach button). |
read more:
BMW Daily Double 27.50 | Daily Double! Two Tools Including Item Number BMW3022: Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts. Plus the two sided counter holder. More details about this tool number BMW 1703 Waterpump Tool This special tool covers most popular applicationsUsed for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M52, M60, M62 (1703 should be used in conjunction with a 32mm or a 36mm thin wrench). Picture is not to scale. |
read more:
Porsche Radio Removal Tools 8.99 | Radio Removal Keys for Porsche As good or better than the factory tools... Please note the rubber on the handle for a better grip. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc... Same as Porsche ref: 000 721 957 01
NOTE : KEYS WILL ALSO WORK ON ALL NEWER MERCEDES For Mercedes 1997 and newer.
Used to remove radio, (Becker) climate controls and Nav system. Applicable most 97 and newer most S, C, E, CL, SL, SLK, ML, G class vehicles. |
read more:
Radio Keys Set 6.99 | Radio Removal ToolsITEM 2040 Applicable all VW / Audi with DIN chassis Radio MountAlso late model Fords with DIN |
read more:
4 Tools for BMW 34.99 | Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50 B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts. C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws. D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip. |
read more:
Pin Wrench Socket 14.99 | VW524Pin Wrench Socket with 1/2" drive.This tool is used for R&R of grooved ring retaining nuton strut tower of front shock absorber. Applicable: This popular tool is used on a wide variety of VW and Audi MK1 golf and GTi , MK2 Golf & GTi 8V and 16VPolos..Audi Coupe..Audi 80 & Audi 90 Also used for adjusting power steering gear on VW Jetta, Golf, GTI. |
read more:
Radio Kets Set 9.99 | 3316 Radio Removal Tools New Body Style Passat Jetta GolfPlease check your manuals for details. |
read more:
Removal Tool for Weights 00 | Removing Tool for stick on weights for aluminium alloy wheel rims.Blunt end with wheel shaped groove for removal of stick on weights,other end with replaceable screw on plastic wedge for removal of adhesives from rims. Overall length is 155mm. |
read more:
14mm Brake Tool 34.99 | 14mm Hex Bit Brake Tool Ford Features:This unique tool has been developed to aid in the removal and installation of front disc brake calipers found on most 1984 and later Ford 6000, 7000 and 8000 CF series trucks. The use of this tool allows for quick and easy removal of the caliper without disassembling the front axle and steering arm assembly.Made from heat treated steel this tool comes in a black finish. |
read more:
Axle Nut Removal Tool 00Axle Nut Removal Tool 36mm
read more:
Mini Flashlight Radio 11.50AM/FM Flashlight Radio
.AM/FM radio .Contoured, fingerfit design cabinet .Light reflector .FM antenna built into handstrap .Operates on two "AA" batteries (not included) .Size: 2 3/4" x 6 1/4" x 1 3/8"
read more:
Axle Nut Removal Tool 11.95 | Axle Nut Removal Tool 36mm |
read more:
Golf Guard Black 96.99Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
Picture is for reference only.
This is the Golf Guard in Black (color).
Also available in Pewter.
Dimensions 49.6" x 14.9" x 16.4"
read more:
Volkswagen Door Tool 9.99 | T10011Volkswagen Door Tool triple Square 4 This is the correct tool for the job New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi. This tool is a high quality item you will like. |
read more:
46mm Axle Nut Removal Tool 00Axle Nut Removal Tool 46mm
read more:
7 Pc Socket Set 59.99Set Includes:. 1" & 1 1/16" Oil Pressure Sending Unit Socket Includes a 1" and 1 1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2 5/8". Designed to be used with a 3/8" drive tool or 1 1/8" wrench.. 1 3/16" Oil Pressure Sending Unit SocketAllows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool.. 1 1/16" GM Thermal Sensor Switch SocketAllows the removal and installation of thermal sensor switch on 1973 1977 GM vehicles. Designed to be used with 1/2" drive tool.. 7/8" Heated Oxygen Sensor Socket Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2" drive for easy access.. 7/8" Low Profile Offset Oxygen Sensor SocketLow profile design for use in tight spaces. Designed to be used with 3/8" drive tool.. 7/8" Oxygen Sensor SocketSocket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8" drive tool or 1" wrench.. 7/8" Universal Vacuum PVS, TVS Valve and Oxygen Sensor SocketDesigned to remove and install vacuum switches with a 7/8" hex and some oxygen sensors. Designed to be used with 3/8" drive tool or with a 1" wrench.
read more:
Pin Wrench 37.00 | Heavy Duty Tensioner with Handle Grip Same as Volkswagen number T10020 VW AUDI TENSION PULLEY SPANNER WRENCH This unique tool is for 1998 and later VW and Audi which require spanner wrench adjustments to the timing belt.Details: Special Wrench for adjusting the belt tension on the following: Audi: A6 1.6 (96 and newer) ALZ VW: Polo Classic, Golf, Bora, New Beetle 1.6 (97 ) AEH / AKL / APF / AUR /AVU / AYD Golf, Bora, New Beetle, 2.0 (98 ) AQY / APK
This is the new style Pin wrench with the (offset) angled head, same as the factory tool only this tool is a little longer for leverage with a rubber handle grip for a better feel compared to the smaller version. |
read more:
Super Duty Pin Wrench 37.00 | Heavy Duty Tensioner with Handle Grip Same as Volkswagen number T10020 VW AUDI TENSION PULLEY SPANNER WRENCH This unique tool is for 1998 and later VW and Audi which require spanner wrench adjustments to the timing belt.Details: Special Wrench for adjusting the belt tension on the following: Audi: A6 1.6 (96 and newer) ALZ VW: Polo Classic, Golf, Bora, New Beetle 1.6 (97 ) AEH / AKL / APF / AUR /AVU / AYD Golf, Bora, New Beetle, 2.0 (98 ) AQY / APK
This is the new style Pin wrench with the (offset) angled head, same as the factory tool only this tool is a little longer for leverage with a rubber handle grip for a better feel compared to the smaller version. |
read more:
Pin Wrench Set 2 49.00 | This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere. SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET. First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts (toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80 Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991). V159 is the correct number the old VW Number on this (smaller) tool was 2587.
T10020 Special wrench with an offset (angled) head (Larger tool on right side of image) This tool also used for adjusting timing belt tension. 99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase. |
read more:
Spark Plug Boot Tool 32.99Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:
Steering Wheel Tool 26.00Steering Wheel Lock Plate Removal Tool
read more:
Valve Tool for Volkswagen 61.95 | Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines. |
read more:
Golf Guard Pewter 96.99Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
This is Pewter color.
Also available in Black.
Dimensions 49.6" x 14.9" x 16.4"
read more:
Removal Keys 22.95 | Removal Keys: USED FOR REMOVAL OF VDO TACHOMETER FROM CENTER CONSOLE. QUALITY TOOLS MADE IN GERMANY. |
read more:
Factory Tool 3417 29.50 | Item Number 3417 Original Oil service Wrench 74mm with14 Points (inside flats flutes). Applications include: Audi, VW Golf, and new body Jetta, TDI (Diesel) and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0litre, Rabbit, Dasher, Scirocco, and New Beetle. Super High Quality Original Factory Tool Made in Germany! Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed. |
read more:
Tappet Depressor Set 81.50 | VW546 Tappet Depressor Tappet Depressor used for preloading cam followers. For Bucket Tappets on VW Golf, Jetta, Caddy, Scirocco, Passat up to 1982 Also Audi 80 , 100
Plus 2078A Tappet Depressor needed for preloading cam followers while exchanging valve adjusting shims. Applicable: Late model VW Audi 4 and 5 cylinder gas engines. More Detail: Some German Tool books have the following info on this tool... For all 4 cylinder engines with bucket tappets 1983 and Newer and all 5 and 6 Cylinder with bucket tappets Golf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe, Audi 80 Quatro, Audi 100, 200, LT28 50D. |
read more:
Honda Acura Tool 19.99 | HONDA / ACURA SHIFT LINKAGE PIN R&R TOOL This tool allows the technician to accurately remove and install the shift linkage pin on vehicles using shift rod linkage. The tool includes a "guide step" on one end and knurled handle for a positive grip for precision removal and installation off the shift linkage pin. |
read more:
Spreader Socket 26.99Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
read more:
Hazet Oil Service Tool 29.50 | Oil service Wrench 74mm with 14 Points (inside flats flutes). Some applications include: Mercedes, Audi, VW Golf, and new body Jetta, TDI (Diesel) and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco,and New Beetle. Mercedes M104, M110, M111, M119, M120 C, E Porsche 944 and 924. Some Toyota (Filter 08922 0211 etc...) Can also be used on BMW Top of housing 1.9L M44 Super High Quality Original Factory Tool Made in Germany! Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed. |
read more:
Hazet Tensioning Tool 75.98 | Driving Tool for Tensioning Device special steel, for operating devicewhen changing the V ribbed belt,especially on VW Polo, Golf and Passat, AUDI since 1991. |
read more:
3 Mercedes Tools 151.00 | Set of Three including: Threaded Pin Wrench Socket (M0007) tool used for the proper R&R of threaded ring which secures prechamber in cylinder head. The Mercedes number for this tool is 615 589 0007 00 Applicable: OM601/602/603 engines through 1989 with vertical injection. Also OM615, OM616, OM617 Ref: 615 589 0007 00 Plus Extractor Tip Double Ended (M0046) Used for the proper removal of prechamber from cylinder head. Used in conjunction with a slide hammer. Applicable: Mercedes engine OM601, OM602, OM603, OM604, OM615, OM616, OM617. Ref: 902 589 0033 00 Plus Slide Hammer use with Tool M0046 for proper removal of prechamber from cylinder head. Also other applications: Tool pulls dented sheet metal back into place. To use, drill a hole in the deepest part of the dent, insert the hook or self threading screw tip and tap lightly with the 2 1/2 lb slide hammer to remove the dent. A 13' long shaft enables high pulling force. Slide hammer has 1/2 13 UNC thread. |
read more:
Spark Plug Boot Tool 24.99 | Spark Plug Boot Tool Due to restricted space the T10029 will install the spark plug boot properly. VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire. With the increased seal and location of the boot, this tool has been made to access and remove the spark plug boot. Tool is approximately 10 inches (250mm) long. Used to pull off the spark plug socket on 2.8 2.9L VR6 engines VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines. This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL. |
read more:
Bosch Jobsite Stereo CD 179.99Bosch Power Box
More than MusicA serious jobsite radio that charges batteries & gives you extra outletsCD player with anti skip technology & MP3 and CD R/RW compatible
Bosch claims its weatherproof Power Box radio is durable enough for a construction site, so we threw it across Boschs Booth at a recent tradeshow. Not only did it survive, the CD didnt even skip. This isnt the first job site radio but its the first to really impress us. Why? A steel and rubber frame protects the ruggedized shell, which houses four ground fault circuit interrupter (GFCI) protected outlets for power tools. The outlets cut power if water leaks in, so you wont get fried. Theres also a slot in the back to charge the batteries for your cordless power tools; when you find yourself away from an outlet the radio can run off those same batteries. The radio also includes a mini plug input for your MP3 player and a 12V DC outlet to recharge your cell phone. Quick word to the wise: if you plan to replicate our drop and roll test, we suggest unplugging all those accessories first!
Jenny Everett (Popular Science 2004)
read more:
Shock Tool Drive Nut 26.50 | Shock Tool Drive Nut See image with details above Please notice this is item 2593 2(A) Pin size 3.5mm with inner (span) size 10.5mm. More data below on the tool. Chassis Shock Absorber 2593 Hex Head Wrench For front axle Golf II, III, Jetta, Vento, Passat from model 88, AUDI 80 from 87. If you are notsure about your size please call or email first. No return on this item unless defective. |
read more:
Push Pin Pliers Set of 2 39.50 | PUSH PIN REMOVAL PLIERS SETPush pin pliers are designed to remove plastic push pins onHonda, Toyota, GM, Saturn and many other vehicles.Special ground tips remove the pins without damage.Pliers can also be used to remove U Joint circle clips.One tool with a 75 degree offset head to allow push pin removal in tightareas. These tools will save you time and headaches. |
read more:
Strut Extractor 155.00 | This tool is used specificallyfor removal of Traction strut from TIE rod lever.(SAME AS BMW TOOL 312140)Applicable: Chassis E31, E32, E34 |
read more:
Hose Clamp Plier 35.00Read what some TDI People say about this tool: The clamp works fine on the MAF clamps & ones a little larger also and it has a locking ratcheting action as you tighten DEFINITELY shop quality! These hose clamp pliers are simply fantastic. Other types of hand type hose clamp pliers and they have a tendency to slip off. These will not! This Hose Clamp Plier is a Must for TDI People. Features & Benefits: Double line, allows for extra reach, removal and locking of clamps into open position, allows for removal of plastic and/or metal self tightening hose clamps with diameters of 11/16" 2 1/2" (18mm 54mm), precision clamp on end of flexible cable allows for extended reach where other models cannot reach, Pliers can be locked, freeing up your hands and making your job easy.
read more:
You Searched for golf radio removal tool
Click golf radio removal tool to go to Radio Removal Tools
SEARCH RSS NEWS USING THE WORDS BELOW
golf radio removal tool |
jetta radio removal tool |
beetle radio removal tool |
new beetle radio removal tool |
auto radio tools |
bmw radio tools |
vw radio tools |
audi radio tools |
mercedes radio tools |
porsche radio tools |
ford radio tools |
Becker radio tools |
Becker radio removal tools |
navigation unit removal |
nav system removal |
Cayenne radio tool |
Carrera radio tools |
Carrera radio removal tools |
Range Rover Becker radio |
Command Sound removal |
Command removal tool |
Classic radio removal |
Exquisit radio removal |
Special radio removal |
radio removal tools |
radio removal tool |
car radio tool |
car radio tools |
bmw radio removal tool |
vw radio removal tool |
audi radio removal tool |
volkswagen radio removal tool |
mercedes radio removal tool |
porsche radio removal tool |
ford radio removal tool |
auto radio tool |
auto radio tools |
car radio removal tools |
bmw radio tool |
vw radio tool |
mercedes radio tool |
audi radio tool |
porsche radio tool |
ford radio tool |
vw radio removal tools |
bmw radio removal tools |
audi radio removal tools |
mercedes radio removal tools |
porsche radio removal tools |
ford radio removal tools |
golf radio removal tool |
Big-Auto bmw radio tools bmw radio removal tool vw radio tools vw radio removal tool audi radio tools audi radio removal tool porsche radio removal tools
www.radioremovaltools.net(c) Copyright 2005 Radio Removal Tools.