porsche radio removal tool get porsche radio removal tool ford radio removal tool -- mmk4mkt

top

Porsche Radio Removal Tools 8.99

Radio Removal Keys for Porsche
As good or better than the factory tools...
Please note the rubber on the handle for a better grip.
Appl: Turbo GT, GT2, GT3, Boxster,
Cayenne 911, 996 , 987, Carrera etc...
Same as Porsche ref: 000 721 957 01

NOTE : KEYS WILL ALSO WORK ON ALL NEWER MERCEDES
For Mercedes 1997 and newer.

Used to remove radio, (Becker) climate controls and Nav system.
Applicable most 97 and newer most
S, C, E, CL, SL, SLK, ML, G class vehicles.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

Complete VW Audi Radio Keys 24.99

Radio Removal Tool Special 15.99

Very popular BMW Radio Removal Tool.Pentagon shaped tool with 5 Sides.The overall length of this tool is 3 5/8 inches.Applicable: Most BMWs.Including E38 E39 7 Series etc...This tool is used to release anti theft radio mounts.
Plus you get a 15 Piece Ratchet and Bit SetIncludes 6 each 1/4 drive 6 point sockets sizes 3/16, 1/4, 5/16 plus 6, 7, and 8mm.Also included are 6 screwdriver bits 2 slotted ( 3/16 and 1/4) 3 Phillips (1, 2 and 3) plus a 1/4 Dr Hex adapter.You can use the 6, 7 and 8mm hex sockets for hose clamps on German cars and many other applications.Set comes in a blow molded carrying case.

BMW Radio Tool 15.00

Antenna Wrench & Radio Service Set 26.99

Antenna Wrench & Radio Service SetRemoves most foreign and domestic radio antennasIncludes tools needed to install and remove radios in GM, Ford and Chrysler vehiclesBonus Universal Code Retrieval ToolKit includes:8 Opening Universal Antenna WrenchFord Radio Removal ToolGM Standard & Tamper proof Radio Removal Tool

Set Radio Removal Keys 14.99

Set Radio Removal Tools
Complete Set of 4Volkswagen Audi Radio Removal ToolsAudi A4, A6, A8 and New BeetleFor Concert, Symphony I and Symphony II stereos.Also for Nav units in Trunk and for CD changers in Glove box.

Re: Resetting Factory Stereo and Handsfree* Mounting Bracket: InstalliionYour Handsfree* kit may require you to remove the radio.(Only two of these are required for Concert, Concert II, Gamma, Delta and others)Tools are for "Top Left" or Top Right" etc.
Buying Radio Keys can be confusing. Here is the deal. If you are working on the vehicles mentioned above or a newer vehicle which requires 4 keys, the odss are this set will do the job.

More radio info: If you are looking for the (2 key set for units with only two slots type the number 3316 in the seach button).

ANTI THEFT RADIO KEY SET 35.99
"NEW"
O.E. ANTI THEFT
RADIO KEY SWITCH BLADE STYLE
Radio Removal Kit Features:
Special features:. Each key folds into the body
handle like a pocket knife.
. Each half of the tool kit allows for an even pulling action.
. The two halves slide and are held together
via an interlocking channel.
. Every Key in the kit is current up to 2005.
The full application range of this new kit is as follows:
. Updated application key kit for Mercedes & all Porsche 996
and Boxster equipped withBecker radios.
. Updated key combo for all Audi & VW radios up to 2004:
models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).
. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.
. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.
. Special Allen key for BMW E38 and E 39 models.
. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:

Switch Blade Radio Keys 37.50
O.E. ANTI THEFT RADIO KEY SWITCH BLADE
Radio Removal Kit Features:Special features:. Each key folds into the body handle like a pocket knife.. Each half of the tool kit allows for an even pulling action.. The two halves slide and are held together via an interlocking channel.. Every Key in the kit is current up to 2005.The full application range of this new kit is as follows:. Updated application key kit for Mercedes & all Porsche 996 and Boxster equipped withBecker radios.. Updated key combo for all Audi & VW radios up to 2004: models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.. Special Allen key for BMW E38 and E 39 models.. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:

Radio Removal Tools 8.99

Set of 2 Radio Removal Keys for Mercedes. Please note the rubber on the handle for a better grip.Used to remove the Radio, A/C and some Instrument clusters most MB models124, 210, 163, 140, 208, 170, 202, 129, 201Very easy to use. Simply slide into radio or a/c instrument cluster slots (two thin slots) on the lower portion left and right of your radio, A/C controller, instrument cluster or navigation unit. The tools snap in pull to remove in just seconds without damage to your radio, A/C, climate control, instrument cluster etc...S, C, E, SL, ML, SLK, CLK.

Radio Kets Set 13.99
3316 Radio Removal Tools New Body Style Passat Jetta GolfPlease check your manuals for details.
read more:

Radio Keys for VW Audi 14.99

944 Tool Set 60.50

Set of two tools for 944
Flywheel Lock needed to stop the motor from rotating during removal and replacement of crankshaft bolt or motor. Applicable: Porsche 944.

Alignment Pin ZDMAK number P218 Same as Porsche Tool 9215.
Alignment Pin crucial in order to properly reinstall the oil filter/water intercooler housing.
Not using this Alignment Pin may cause misalignment during this procedure, which may lead to the oil pressure relief valve sticking and ultimately engine damage.
Applicable: Porsche model 944 from 1983 to 1986.

BMW Daily Double 27.50

Daily Double!
Two Tools
Including Item Number BMW3022: Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.
Plus the two sided counter holder. More details about this tool number BMW 1703 Waterpump Tool
This special tool covers most popular applicationsUsed for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M52, M60, M62 (1703 should be used in conjunction with a 32mm or a 36mm thin wrench). Picture is not to scale.

Radio Keys Set 6.99

Radio Removal ToolsITEM 2040 Applicable all VW / Audi with DIN chassis Radio MountAlso late model Fords with DIN

4 Tools for BMW 34.99

Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) 
A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50
B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts.
C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws.
D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip.

Radio Kets Set 9.99

3316 Radio Removal Tools New Body Style Passat Jetta GolfPlease check your manuals for details.

Removal Tool for Weights 00

Removing Tool for stick on weights for aluminium alloy wheel rims.Blunt end with wheel shaped groove for removal of stick on weights,other end with replaceable screw on plastic wedge for removal of adhesives from rims. Overall length is 155mm.

14mm Brake Tool 34.99

14mm Hex Bit Brake Tool Ford Features:This unique tool has been developed to aid in the removal and installation of front disc brake calipers found on most 1984 and later Ford 6000, 7000 and 8000 CF series trucks. The use of this tool allows for quick and easy removal of the caliper without disassembling the front axle and steering arm assembly.Made from heat treated steel this tool comes in a black finish.

Flywheel Lock 22.95
215 Volkswagen Porsche Tool
Flywheel Lockused to secure the crankshaft from rotating during R&R of motor.
Used in conjunction with Engine Holding Fixture P201,
where Flywheel Lock bolts into a machined channel.
All Porsche and VW 6V or 12V, air cooled.Please note: This item is included in the complete kit also.
read more:

Axle Nut Removal Tool 00
Axle Nut Removal Tool 36mm
read more:

36mm Flare Wrench 42.50
Special 36mm Flare Wrench like vw 179.Oil Line 12 Point Wrench for servicing Oil Lineson most 1977 and Later Porsche 911 and 944 Turbo.This tool is also used for adjusting rear suspension heighton 77 and Newer Porsche 911and for camber on most late model Volkswagen Bug.
read more:

Mini Flashlight Radio 11.50
AM/FM Flashlight Radio
.AM/FM radio .Contoured, fingerfit design cabinet .Light reflector .FM antenna built into handstrap .Operates on two "AA" batteries (not included) .Size: 2 3/4" x 6 1/4" x 1 3/8"
read more:

Axle Nut Removal Tool 11.95

Axle Nut Removal Tool 36mm

B90 Sub Kit for Porsche 160.00

PORSCHE B90 SUB KITS
There are Three different Sub Kits available for Porsche:
PORSCHE EARLY
PORSCHE LATE
PORSCHE TURBO
Details:
NUMBER B90 P1 FOR 911 1973 OLDERand for 914 , 912 C4 Front wheel bearing only 1989 and newer.
ITEM NUMBER B90 P 2 for 911 (non Turbo) 1974 and newer 924, 944 1985 and newer 968 and boxster.
ITEM NUMBER B90 P 3 for 911 Turbo 1990 and newer 928

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

Set 2 Alternator Tools 47.00

Combo Socket Set of 2 consisting of the 17mm Multi Spline Adapter and XZN (12 Point) Socket size M10 for mounting and dismounting the alternator pulley at the generator.Volkswagen Audi Mercedes Porsche etc...For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator), especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3 .
The short serrated socket (3400) is size 17MM outside diameter and Length is 30mm.
The larger tool is M10 XZN triple square and is 1/2 drive x 140mm Length.Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool

Also: 1990 to 1994 porsche C2 and C4 and all porsche 993s use a (M10) 10mm 12point socket tool to hold the alternator shaft when replacing the belts the area between the alternator and car body is very limited a 10mm 12point spanner style wrench works well for this job.

46mm Axle Nut Removal Tool 00
Axle Nut Removal Tool 46mm
read more:

7 Pc Socket Set 59.99
Set Includes:. 1" & 1 1/16" Oil Pressure Sending Unit Socket Includes a 1" and 1 1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2 5/8". Designed to be used with a 3/8" drive tool or 1 1/8" wrench.. 1 3/16" Oil Pressure Sending Unit SocketAllows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool.. 1 1/16" GM Thermal Sensor Switch SocketAllows the removal and installation of thermal sensor switch on 1973 1977 GM vehicles. Designed to be used with 1/2" drive tool.. 7/8" Heated Oxygen Sensor Socket Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2" drive for easy access.. 7/8" Low Profile Offset Oxygen Sensor SocketLow profile design for use in tight spaces. Designed to be used with 3/8" drive tool.. 7/8" Oxygen Sensor SocketSocket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8" drive tool or 1" wrench.. 7/8" Universal Vacuum PVS, TVS Valve and Oxygen Sensor SocketDesigned to remove and install vacuum switches with a 7/8" hex and some oxygen sensors. Designed to be used with 3/8" drive tool or with a 1" wrench.
read more:

Sprocket Holder 47.50

Same as Porsche Tool 9200Locking Bar needed to properly secure the balance shaft sprocketfrom rotating during R&R of retaining bolt.Applicable: Porsche 944.

Porsche Hub Wheel Bearing 220.00

B90 Porsche Main Kit Hub/Wheel Bearing R&RDesigned to accurately and efficientlyExtract or Install the Wheel Bearing and Hub of spindle assemblies.Applicable: all 911, 912, 914, 924, 928, 944, 968and Boxster with S.R.W.B. and I.R.S.Excluding* Hubs of 914 and 356 Sub kits are below for specific Porsche Models.Email with any questions.Pictures are for reference only.

World Famous Assistent 775.00
Rolling Tool Box
Hazet World Famous Assistent
With collapsible swinging down pillars
to reduce the height to a space saving minimum (642 mm).
Super High Quality German made tool box number 166C.
The favorite of Porsche owners everywhere!
read more:

Super Strong 30 X 32mm 27.50

Big Sucker! Metric Thin Wrench 32 x 36mm with just over a 1/4 inch (8mm) thickness and overall length of 13 1/2 inches for proper leverage. This is a STRONG BEEFY tool you will like. A very good tool for the experienced technician and should be one of the first items a new tech will purchase. All European auto techs need thin wrenches and this is one the best values on the market and it is a heavy duty tool that will pay for itself very quickly. For use on Oil Lines, Fan Clutch work, A/C and Transmission work. These thin wrenches are becoming more and more necessary every day. Some applications include: Mercedes and BMW R&R of fan clutch hub nut. The 32mm is used for R&R of tie rods Porsche model 911 Turbo, 1976 89and the 36mm is needed for proper adjustment of rear ride height Porsche 911 1977 89 etc...This item is on sale now.

Porsche Buyers Guide 10.75

About this title: Dean Batchelors classic Illustrated Porsche Buyers Guide is completely revised and updated by Randy Leffingwell, author of Porsche Legends. This edition includes all the new Porsches introduced since the 1989 third edition including the newest 911s, the incredible Boxster, the 959, and the 968. Porsche owners, prospective buyers, and enthusiasts who simply admire Porsche craftsmanship and performance will appreciate the details covered in the revised text with its buying tips and in depth information arranged year by year and model by model.

Door Handlle Hinge Kit 79.50
Tool Kit for BENZ , VW , AUDI , PORSCHE door hinge/handle installer & remover.
Finally, a compact solution to accessing the special features found on the door hinges and door handles of VW/Audi, Mercedes Benz and Porsche, includes 4 door hinge bits (less than 1 inch long) with slender ratcheting wrench and extra long drivers for accessing Mercedes and VW door handle fasteners.
read more:

Alignment Pin Drift 19.95

Same as Porsche Tool 9215Alignment Pin crucial in order to properly reinstall the oil filter/water intercooler housing.Not using this Alignment Pin may cause misalignment during this procedure,which may lead to the oil pressure relief valve sticking and ultimately engine damage.Applicable: Porsche model 944 1983 '86.

Steering Wheel Tool 26.00
Steering Wheel Lock Plate Removal Tool
read more:

Porsche Adjusment Kit 46.50
911 Adjusment Kit
3 Piece Adjustment Tool Kit
Designed to adjust the mechanical injection pump for performance emission tuning. Applicable 911 69 thru 73.
read more:

Flywheel Lock 00
Universal Flywheel Lock
Designed for use on all air cooled Volkswagen engines
Type 1, 2, 3, & 4 and on all air cooled Porsche engines
(series 356, 912, 914, & all 911s through 1969).
This tool is a must when changing a flywheel or its seal
and it comes in handy when changing a clutch.
Made from a forging, this quality tool will last a lifetime.
read more:

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Removal Keys 22.95

Removal Keys: USED FOR REMOVAL OF VDO TACHOMETER FROM CENTER CONSOLE. QUALITY TOOLS MADE IN GERMANY.

Special Adaptor Ring * 154.50

New Porsche Adaptor Ring
For the budget minded Porsche & VW air cooled engine rebuilder...Check it out.....
This Ring (same as the one equipped on the factory style Engine Holding Fixture P201)
is void of any holding or securing tubes.
This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" Bolts,
thus allowing for a full 360 degree rotation of the engine.
This ring is designed to bolt up to every Porsche and VW fully dressed air cooled engine ever produced.
It is machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts, including the flywheel and its respective lock tool (VW Flywheel lock 215). Call Zdmak 877 938 6657.

911 Oil Service Tool 38.00

Porsche 911 Tool.
Hazet Oil Filter Wrench size 92mm.
With square drive nominal size 12.5 = 1/2 inch.
outside hexagon 27 mm.
15 point (inside flats or flutes)
For 911 and several other vehicles such as Saab 900, 9000 and 99 etc...
High Quality Tool Made in Germany.

End Play Kit 16.95

This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.

Spring Loaded Gauge 46.50

P228 Spring Loaded Gauge Spring Loaded Gauge Displays valve spring height using pre calibrated indicatorsstamped onto the outside surface of this tool. Crucial for accurate valve spring adjustment.Applicable: Porsche 911.Same as Porsche P10C

Honda Acura Tool 19.99

HONDA / ACURA SHIFT LINKAGE PIN R&R TOOL This tool allows the technician to accurately remove and install the shift linkage pin on vehicles using shift rod linkage. The tool includes a "guide step" on one end and knurled handle for a positive grip for precision removal and installation off the shift linkage pin.

Ball Joint Pin Wrench Socket 55.95

Porsche Reference Number for this tool is P280B. ZDMAK Number P210
Pin Wrench Socket with 1/2" drive and a pin reinforcement sleeve,needed for the proper R&R of ball joint nutsw/o damage to the Pin Wrench Socket or nut.911 Porsche 1965 89912, 914

Heavy Duty 8mm Allen 27.95

Multiple applications for this handy tool.
Super Duty 8mm Allen Item P243 Extra Long 3/8 Drive SocketThis 8mm Extra Long Allen Socket is a solid one piece construction.Overall length is 7.75 inches.Used for R & R of some Benz Cylinder Headbolts,and some BMW C.V Joint Bolts,and Porsche Heat Exchange Exhaust sysetms 911 930 Porsche

You Searched for

porsche radio removal tool